Mercury Elite 3000U UPS Description:
Mercury Elite 3000U UPS has the following in specifications;
CAPACITY: Rating 3000VA
INPUT: Voltage 220VAC / 230VAC / 240VAC/ Voltage Range 140 ? 300VAC
OUTPUT:?Voltage Regulation (Batt. Mode) +/-10%
Frequency 50Hz or 60Hz/ Frequency Regulation (Batt. Mode) +/-1Hz
Output Waveform Modified Sine Wave
BATTERY: Battery Type 12V/9.0AH x 4
Recharge Time 6-8 hrs to 90% after complete discharge
TRANSFER TIME: Typical 10ms
INDICATOR: AC Mode The left green LED lighting & the 1st to 4th green
LEDs gradually lighting indicating load level
Battery Mode The left green LED flashing & the 1st to 4th green
LEDs gradually lighting indicating battery capacity Fault Mode Red LED Lighting
AUDIBLE ALARM;
- Backup Mode Sounding every 10 seconds
- Low Battery Sounding every 1 seconds
- Overload Sounding every 0.5 seconds
- Fault Continuously sounding
PROTECTION: Full Protection Discharge, Overcharge and Overload Protection
PHYSICAL: Dimension (mm) 436(L) x 145(W) x 211.7(H)
ENVIRONMENT: Operating Environment 0?C ? 40?C / Noise Level Less than 40dB
Automatic restart of loads after UPS shutdown ??Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test ??Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Voltage Regulation (AVR) ??Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Resettable circuit breaker ??Easy recovery from overloads; no need to replace a fuse.
Located in Nairobi CBD on the Standard street, Caxton house ground floor opposite Bruce house. Follow us on Instagram at?https://www.instagram.com/kingspaperworks For more UPS we do stock variety of them all in one link?https://kingspaperworks.com/product-category/electronics/accessories-supplies/power-protection/ups/
There are no reviews yet.